TPS40003DGQ Overview
With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.25V~5.5V. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 600kHz. dc dc regulator can be generalized using Surface Mount. Current Limit, Enable, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 10 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "TPS40003". Switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 2.25V. Based on the test statistics, DC regulator outputs voltage 700mV. It should be noted that the dc to dc regulator only accepts 5.5V voltage as input voltage. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 97 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 700kHz. The supply voltage must be 5V.
TPS40003DGQ Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
TPS40003DGQ Applications
There are a lot of Texas Instruments TPS40003DGQ DC to DC converter applications.
- seismic instrument power circuits
- Large fire protection systems
- Motor controller circuits
- Access control systems
- Balance equipment
- Digital display device
- Printing equipment
- Surge protection circuits
- Cutting machine tools
- Production lines
