TPS3839G12DBZR Overview
It is mounted through 3 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. 3 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 900mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 150nA. A similar IC managements number of the manufacturer can always be found by using TPS3839G12, the base power ics number. Voltage supervisor can work with a supply temperature of 500nA at the most.
TPS3839G12DBZR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current
TPS3839G12DBZR Applications
There are a lot of Texas Instruments TPS3839G12DBZR Voltage Supervisors applications.
- Battery cars
- Power communication system
- Dash board
- Automotive power systems
- Consumer electronics
- emergency room
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Detection of phase imbalance
- Satellite navigation
