TPS3839A09DBZT Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. 3 pins make up the power management. IC management can only work with a supply voltage of 900mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6.5V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The power management's supply current is 150nA. A similar IC managements number of the manufacturer can always be found by using TPS3839A09, the base power ics number.
TPS3839A09DBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current
TPS3839A09DBZT Applications
There are a lot of Texas Instruments TPS3839A09DBZT Voltage Supervisors applications.
- FPGA design
- Dash board
- Magnetic resonance imaging
- emergency room
- Consumer electronics
- Urban rail transit weak current power monitoring
- Microprocessor system
- Radar
- Radio
- Insulation fault location system
