TPS3836E18DBVR Overview
Power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. Power management is included in the Surface Mount mount. A total of 5 pins are located on this power management. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.6V volts. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 250nA. A similar IC managements number of the manufacturer can always be found by using TPS3836E18, the base power ics number. Voltage supervisor can work with a supply temperature of 15μA at the most.
TPS3836E18DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3836E18DBVR Applications
There are a lot of Texas Instruments TPS3836E18DBVR Voltage Supervisors applications.
- Computer applications
- Digitally controlled LDO regulators circuit
- Consumer electronics
- Embedded computing
- Precision measurement
- Important electronics for automotive protection
- Smart meter
- Unattended substation automation
- Battery-powered equipment
- Magnetic resonance imaging
