TPS3824-25DBVR Overview
A total of 5 terminals are used to mount this power management. A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3824, which is the base power ics number. The power management can work with a maximum supply temperature of 25μA.
TPS3824-25DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3824-25DBVR Applications
There are a lot of Texas Instruments TPS3824-25DBVR Voltage Supervisors applications.
- Display equipment
- Electric heating appliances
- Consumer electronics
- Personal computers
- Sensitive sensors
- Unattended substation automation
- Detection of phase sequence
- Power distribution systems of operating room
- Leakage protection
- Kitchen appliances
