TPS3823-25DBVTG4 Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 5 pins. 5 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to TPS3823, the base PMIC number. The maximum supply temperature is 25μA.
TPS3823-25DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3823-25DBVTG4 Applications
There are a lot of Texas Instruments TPS3823-25DBVTG4 Voltage Supervisors applications.
- Smart meter
- Power communication system
- Kitchen appliances
- Electronics installed in the vehicle
- Precision measurement
- Embedded computing
- Dash board
- Power distribution systems of CCU
- DSP
- Household appliances
