TPS3800G27DCKR Overview
A total of 5 terminals are used to mount this power management. Power management is packaged in a Cut Tape (CT) way. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3.3V-voltage supply. Power management conducts at a voltage of 1. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 5 pins. Power managment ic pin count is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.6V. The maximum supply voltage (Vsup) is not to exceed 4V volts in this IC management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supervisor's supply current is specified to 9μA. For similar manage ics search of the manufacturer, you can always refer to TPS3800, the base PMIC number. A maximum supply temperature of 18μA can be used with this power management.
TPS3800G27DCKR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
9μA operating supply current
TPS3800G27DCKR Applications
There are a lot of Texas Instruments TPS3800G27DCKR Voltage Supervisors applications.
- Detection of phase sequence
- Rechargeable batteries
- Insulation fault location system
- Leakage current detection
- Electronics installed in the vehicle
- Radio
- Multi-voltage system
- Solar power charger
- Smartphones
- Digitally controlled LDO regulators circuit
