TPS3510P Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 3 channels. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. When a supply voltage of 5V is applied to the power ic, it conducts. In a 3 supply voltage, the PMIC chip conducts. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. This power management has 8 pins. IC management can only work with a supply voltage of 4V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 15V volts. The recommended mounting type is Through Hole. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There is a supply current of 1mA for the power management. It is always advisable to use TPS3510, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 1mA at the most.
TPS3510P Features
Multi-Voltage Supervisor type
Minimum supply voltage of 4V
1mA operating supply current
TPS3510P Applications
There are a lot of Texas Instruments TPS3510P Voltage Supervisors applications.
- Household appliances
- Power distribution systems of operating room
- Data storage applications
- Military electronics
- Electronics installed in the vehicle
- Dash board
- Leakage protection
- Radio
- Smartphones
- Set top box
