TPS3128E12DBVRG4 Overview
Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management conducts at a voltage of 1.2V. A supply voltage of 1 is used to conduct the PMIC chip. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 5 pins in it. The pins of the power management system count 5. IC management can only work with a supply voltage of 750mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. The recommended mounting type for IC management is Surface Mount. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 14μA. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using TPS3128E12, the base power ics number. At most, voltage supervisor can operate at a supply temperature of 30μA.
TPS3128E12DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3128E12DBVRG4 Applications
There are a lot of Texas Instruments TPS3128E12DBVRG4 Voltage Supervisors applications.
- Power communication system
- FPGA design
- Radio
- Electrical fire monitoring system
- Important electronics for automotive protection
- Military electronics
- Display equipment
- Dash board
- Efficient information transmission
- Microprocessor system
