TPS3128E12DBVR Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 1.2V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 5 pins are located on this power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 750mV, which is the minimum supply voltage that should be applied. There should be no more than 3.3V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 14μA volt supply current. There are also other features in the software such as [0], just to mention a few. You can always use TPS3128E12, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 30μA.
TPS3128E12DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
14μA operating supply current
TPS3128E12DBVR Applications
There are a lot of Texas Instruments TPS3128E12DBVR Voltage Supervisors applications.
- Set top box
- Refrigeration
- Low voltage/high power - AI, GPU
- Insulation fault location system
- WiFi router
- Important electronics for automotive safety
- Electronics installed in the vehicle
- Telecommunications equipment
- Battery cars
- Solar power charger
