TPS3110K33DBVT Overview
This power management consists of 6 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Cut Tape (CT). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SOT-23-6 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 3.3V. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. Taking into account all of the pins, this power management has a total of 6. There are 6 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 400mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 3.3V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TJ . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 1.2μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3110K33, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 27μA.
TPS3110K33DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110K33DBVT Applications
There are a lot of Texas Instruments TPS3110K33DBVT Voltage Supervisors applications.
- Computer applications
- External alarm
- Microcontroller system
- Automotive permanent magnet synchronous motors
- Satellite navigation
- Power distribution systems of CCU
- Power distribution systems of infant care room
- Radar
- Unattended substation automation
- Detection of phase imbalance
