TPS3110E15DBVTG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SOT-23 functions for you to refer to. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. There is a subcategory called Power Management Circuits for this power management. In total, the power management has 6 pins in it. This power management system has 6 pins. A voltage (Vsup) that doesn't fall below 400mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 3.3V volts in this IC power. In order to maintain a stable supply current for the power management, 1.2μA is the recommended value. Besides the IC types mentioned above, the power management system also includes other types such as POWER SUPPLY MANAGEMENT CIRCUIT. The power management can work with a maximum supply temperature of 27μA.
TPS3110E15DBVTG4 Features
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110E15DBVTG4 Applications
There are a lot of Texas Instruments
TPS3110E15DBVTG4 Voltage Supervisors applications.
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
- Stable power system
- Sensitive sensors
- Efficient information transmission
- Functional modules
- Consumer electronics
