TPS3110E09DBVRG4 Overview
It is mounted through 6 terminals on the power management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 0.9V. During operation, the power ic is supplied with a voltage of 1. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 6 pins on the board. 6 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 400mV. Voltage (Vsup) shouldn't exceed 3.3V volts in this PMIC. As far as the supply current of the power management is concerned, it is 1.2μA. It is also possible to use other types of IC, such as POWER SUPPLY MANAGEMENT CIRCUIT, in this supervisor. The maximum supply temperature that PMIC chip can work with is 27μA.
TPS3110E09DBVRG4 Features
Minimum supply voltage of 400mV
1.2μA operating supply current
TPS3110E09DBVRG4 Applications
There are a lot of Texas Instruments
TPS3110E09DBVRG4 Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Medical-specific isolation transformer
- Medical-specific insulation monitor
- Transformer load monitoring equipment
- External alarm
- Display equipment
- DC stabilized power supply module
- Insulation fault location system
- Magnetic resonance imaging
