TPS2480PW Overview
In the 20-TSSOP (0.173, 4.40mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 20 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 20 pins.The supply voltage 48V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Monitor.A reliable operation requires the temperature to be set to -40°C~125°C.Apps for General Purpose are available on the device.A feature of I2C, Latched Fault UVLO describes it.Using a 9V~80VV power source should be able to power the device.The TPS2480 family includes it.During operation, 20 pins are used.Hot-swappable device has Current Limit, Fault Timeout programmable features.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 9V so that the device can function normally.Vsup is set to 80V, the maximum supply voltage.Part 9/80V is associated with power supplies.There is a maximum current requirement of 1mA for it to operate.In the case of a 100V output voltage, high efficiency can be achieved.
TPS2480PW Features
The terminal position of 20
Features of I2C, Latched Fault UVLO
Programmable features of Current Limit, Fault Timeout
Output voltage of 100V
TPS2480PW Applications
There are a lot of Texas Instruments
TPS2480PW hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
