TPS24772RGER Overview
This is included in the 24-VFQFN Exposed Pad package.At present, 1 channels are available.It's packaged in a Tape & Reel (TR) shape.Total terminations are 24.Device position QUAD is its terminal position.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~125°C.Application General Purpose is available on the device.As you can see in Auto Retry, it's featured.The device should be able to be powered by a 2.5V~18VV power source.There are numbers in the TPS24772 family that include it.24 pins are used in operation.There are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.5V for normal operation of the device.There is a supply current of 2.95mA.Hot Swap requires 4mA volts of current to operate.
TPS24772RGER Features
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
TPS24772RGER Applications
There are a lot of Texas Instruments
TPS24772RGER hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
