TPS2456ARHHT Overview
This is included in the 36-VFQFN Exposed Pad package.At present, 2 channels are available.It's packaged in a Tape & Reel (TR) shape.Total terminations are 36.Device position QUAD is its terminal position.A supply voltage of 12V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller, OR Controller.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Latched Fault, Thermal Limit, UVLO, it's featured.The device should be able to be powered by a 8.5V~15VV power source.There are numbers in the TPS2456 family that include it.36 pins are used in operation.There are Circuit Breaker, Current Limit, Fault Timeout, Slew Rate features that can be programmed.In the present, there is a shortage of 3.1mA.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 8.5V for normal operation of the device.15V (maximum supply voltage) is set.Hot Swap requires 4mA volts of current to operate.
TPS2456ARHHT Features
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Circuit Breaker, Current Limit, Fault Timeout, Slew Rate
TPS2456ARHHT Applications
There are a lot of Texas Instruments
TPS2456ARHHT hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
