TPS2350PWG4 Overview
This is included in the 14-TSSOP (0.173, 4.40mm Width) package.At present, 3 channels are available.It's packaged in a Tube shape.Total terminations are 14.Device position DUAL is its terminal position.In total, there are 14 pins on it.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application -48V is available on the device.As you can see in Auto Retry, it's featured.The device should be able to be powered by a -80V~-12VV power source.There are numbers in the TPS2350 family that include it.14 pins are used in operation.There are Current Limit, Fault Timeout, OVP, Slew Rate, UVLO features that can be programmed.As far as the power supplies are concerned, the part has the character -48V.In default mode, it outputs 1.Hot Swap requires 2mA volts of current to operate.80V output voltage enables high efficiency.
TPS2350PWG4 Features
The terminal position of 14
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, Slew Rate, UVLO
Output voltage of 80V
TPS2350PWG4 Applications
There are a lot of Texas Instruments
TPS2350PWG4 hot swap controllers applications.
- Avionics systems
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
