TPS2223APWPR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is PCMCIA Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 4 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.In terms of features, the LED driving board has Status Flag.The TPS2223 family consists of this type.A total of 24 terminations have been found in it.24 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.24 pins are equipped with it.85mOhm is the resistance of the lighting driver.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.This LED driver is configured to have a maximum supply voltage of 3.6V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.In total, 3 channels are available.It has a power supply of 3.35V.With the help of this lighting driver, POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING can also be produced.
TPS2223APWPR Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2223APWPR Applications
There are a lot of Texas Instruments TPS2223APWPR Power Switches ICs applications.
- USB3.1 Power Delivery
- Set-top-box
- Notebook PC
- PC Card Hot Swap
- Wireless/Networking Cards
- Wireless Headsets
- PC Cards
- Telecom and Network Systems
- Low Voltage I/O System Power
- PDAs
