TPS2220APWP Overview
Tube is how it's packaged.It is included in the package 24-TSSOP (0.173, 4.40mm Width) Exposed Pad.The lighting driver has the mounting type Surface Mount.It owns PCMCIA Switch switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 3.A voltage of Not Required is used to power it.It has a total of Status Flag features.It belongs to the family TPS2220.As a result, there are 24 terminations.The operation is carried out using the 24 pins.It is important to note that the LED driving board has 1 functions.1AV is the maximum output of the LED driver.Using a voltage of 3.3V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.It has 85mOhm resistance.The LED driver is self-contained in an econtainer with Power Management Circuits capacity.For normal operation, the supply voltage (Vsup) should be kept above 3V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 3.Using this LED driver, it is also possible to produce POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING.
TPS2220APWP Features
Supplied from 3.3V
Resistance of 85mOhm
3 channels
Additional features like POWER-ON RESET; BREAK-BEFORE-MAKE SWITCHING
TPS2220APWP Applications
There are a lot of Texas Instruments TPS2220APWP Power Switches ICs applications.
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- USB Protection
- Solid State Drivers
- Hot-Swap Systems
- PDAs
- Portable GPS
- Portable/Handheld Devices
- Portable Music Players
