TLV4110IDGNR Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 3V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 3.5mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 700μA . Keeping the voltage gain at 110dB is the best course of action. There are a total of 1 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. It is used TR to pack the op amps.
TLV4110IDGNR Features
8 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
TLV4110IDGNR Applications
There are a lot of Texas Instruments TLV4110IDGNR Instrumentational OP Amps applications.
- Hand-held batteries
- Semiconductor detectors
- Signal amplification
- Voltage regulation circuit
- PDA
- Active probe
- Medical imaging
- Fast A/D and D/A converters
- Computer workstations
- Power control
