TLV3704IDR Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail output on this device.The chip is packaged with Cut Tape (CT) .The device is designed with 14 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~125°C .This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLV3704 .A quiescent current of 1μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 3.2μA supply current.If the current supply exceeds 800nA , the comparator might be damaged.This device requires +-1.35/+-8/2.7/16V power supplies to operate.Input current to the device cannot exceed 250pA .The voltage formula shows that the part has a voltage gain of 120dB .Comparator electronics is acceptable to pack the device by TR .
TLV3704IDR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3704IDR Applications
There are a lot of Texas Instruments
TLV3704IDR linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
