TLV3701CDBVR Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has5 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 2.7V voltage.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.A total of 5 pins are included.A Surface Mount mounting type is recommended.A temperature setting of 0°C~70°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 5 pins.Alternatively, you may search for TLV3701 to find more pin-to-pin solutions for your specific needs.There is 1μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 800nA .A current supply greater than 800nA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 250pA current into the device.Comparator electronics follows that the voltage gain of the part is 120dB .The device is acceptable to pack by TR .
TLV3701CDBVR Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701CDBVR Applications
There are a lot of Texas Instruments
TLV3701CDBVR linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
