TLV342SIRUGRG4 Overview
There is a QFN case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape & Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 10 mark. The total number of pins on linear amplifier is 10. The linear amplifier should be run at 1.8V at all times, so please keep that in mind when using it. 10 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. It is possible to operate this buffer amplifier from a supply current of 75μA . 110dB should be the voltage gain. Op amp ic has 2 channels. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 125°C, Instrumentation amplifier should not be used. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The electrical part is capable of being powered by a voltage of under 5.5V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 1.5V.
TLV342SIRUGRG4 Features
10 Pins
supply voltage of 1.8V
110dB voltage gain
TLV342SIRUGRG4 Applications
There are a lot of Texas Instruments
TLV342SIRUGRG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
