TLV341IDCKTE4 Overview
An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 1.8V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 300μV for input offset voltage. A supply current of 75μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 110dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. Keeping the linear amplifier's supply voltage above 1.5V is recommended.
TLV341IDCKTE4 Features
6 Pins
supply voltage of 1.8V
110dB voltage gain
TLV341IDCKTE4 Applications
There are a lot of Texas Instruments
TLV341IDCKTE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
