TLV2780CDBVTG4 Overview
The linear amplifier is packaged in a SOT-23 case. This is a OPERATIONAL AMPLIFIER type op amp. Linear amplifier is delivered in a Tape & Reel case. The number of terminations approaches 6. Buffer amplifier has a total of 6 pins. Please take in mind that this instrumentation amplifier should be run at 2.7V. The buffer op amp includes 6 pins. Regarding input offset voltage, op amp rates 3mV. This op amp can operate from a supply current at 650μA. The voltage gain should stay at 120dB. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amp only at temperatures no higher than 125°C. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. TAPE AND REEL is adopted to pack the instrumentation amplifier. With regard to the supply voltage, this electrical component is capable of working from under 3.6V. It is advised to keep the op amp's supply voltage higher than 1.8V. You should conduct this electronic component under the dual supply voltage of 1.8V.
TLV2780CDBVTG4 Features
6 Pins
supply voltage of 2.7V
120dB voltage gain
TLV2780CDBVTG4 Applications
There are a lot of Texas Instruments
TLV2780CDBVTG4 Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
