TLV2774INE4 Overview
It is packaged in an N-case that protects the operational amplifiers from damage. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 2.5mV for input offset voltage. A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 113.06dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 125°C. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. It is important to keep in mind that the power supply voltage of this electric component is below 6V, which is suitable. Keeping the linear amplifier's supply voltage above 2.5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 3V volts.
TLV2774INE4 Features
14 Pins
supply voltage of 2.7V
113.06dB voltage gain
TLV2774INE4 Applications
There are a lot of Texas Instruments
TLV2774INE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
