TLV2774CD Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 14 terminations this year. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. It should be noted that this op amp is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. The input offset voltage is 2.5mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. An 1mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are 4 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 3V voltage.
TLV2774CD Features
14 Pins
supply voltage of 2.7V
113.06dB voltage gain
Output Type: Rail-to-Rail
TLV2774CD Applications
There are a lot of Texas Instruments TLV2774CD Instrumentational OP Amps applications.
- Fission chambers
- Voltage regulation circuit
- Integrator circuits
- Inverse/same-phase proportional circuit
- Multiplication circuits
- Measurements of Wheatstone bridge
- single/dual op amp sum and difference circuits
- Band-pass filter
- Home audio systems
- Signal operation
