TLV2764CDG4 Overview
There is a D case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 2.4V at all times, so please keep that in mind when using it. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 3.5mV. It is possible to operate this buffer amplifier from a supply current of 20μA . 101.58dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, Instrumentation amplifier should not be used. There are 4 elements in total in this linear amplifier. The electrical part is capable of being powered by a voltage of under 3.6V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 1.8V. As a general rule, you should conduct this electronic component under dual supply voltages of 1.8V volts.
TLV2764CDG4 Features
14 Pins
supply voltage of 2.4V
101.58dB voltage gain
TLV2764CDG4 Applications
There are a lot of Texas Instruments
TLV2764CDG4 Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
