TLV2474AQDRG4Q1 Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 14 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 1.6mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. You can run this op amp ic on 600μA . Maintain 120dB as the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are 4 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. For packing the buffer amplifier, the TR-axis is adopted. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
TLV2474AQDRG4Q1 Features
8 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2474AQDRG4Q1 Applications
There are a lot of Texas Instruments TLV2474AQDRG4Q1 Instrumentational OP Amps applications.
- Home audio systems
- Signal transformation
- Broadcasting
- High/low-pass filter circuit
- Weighing systems
- Voltage regulation circuit
- Proportional counter tubes
- Polarized electrodes
- Television
- Video computer boards
