TLV2473CDRG4 Overview
Packaging for the buffer amplifier is in the form of a D case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Tape and Reel case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 2.2mV. Using a supply current of 600μA , this buffer op amp will be able to operate. Keeping the voltage gain at 120dB is the best course of action. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. You should not use op amp above 70°C degrees. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.7V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 3V volts for this part.
TLV2473CDRG4 Features
14 Pins
supply voltage of 3V
120dB voltage gain
TLV2473CDRG4 Applications
There are a lot of Texas Instruments
TLV2473CDRG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
