TLV2464CPW Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 14 terminations in the next few months. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 550μA. 109dB should be the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V.
TLV2464CPW Features
14 Pins
supply voltage of 3V
109dB voltage gain
Output Type: Rail-to-Rail
TLV2464CPW Applications
There are a lot of Texas Instruments TLV2464CPW Instrumentational OP Amps applications.
- Scintillation detectors
- Weighing systems
- Medical imaging
- Industrial applications including automation
- Oscilloscopes
- Large motor controllers
- High input resistance broadband
- MP3
- Integrator circuits
- Micro signal measurement
