TLV2401CDBVRG4 Overview
There is a SOT-23 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 2.7V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are located on the operational amplifiers. The input offset voltage is 1.2mV. The buffer amplifier is capable of operating from a supply current of 900nA . It is recommended to keep the voltage gain at 120dB at all times. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 8V. Under 16V is the minimum supply voltage for this electric component. Over 2.5V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 8V.
TLV2401CDBVRG4 Features
5 Pins
supply voltage of 2.7V
120dB voltage gain
TLV2401CDBVRG4 Applications
There are a lot of Texas Instruments
TLV2401CDBVRG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
