TLV2264AMJB Overview
In the package, you will find a CDIP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 3V battery. The op amp ic has an array of 14 pins on it. Op amp rates 950μV as input offset voltage. You should keep the voltage gain at 114.81dB for the time being. On the buffer amps, there are 4 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -55°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. This electric component can work from a voltage of under 8V as far as supply voltage is concerned. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 4V volts when you conduct this part.
TLV2264AMJB Features
14 Pins
supply voltage of 3V
114.81dB voltage gain
TLV2264AMJB Applications
There are a lot of Texas Instruments
TLV2264AMJB Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
