TLV2241IP Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic component is recommended to be mounted using the mounting type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 1μA, this op amp ic can operate. There should be no change in the voltage gain at 120dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 6V.
TLV2241IP Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2241IP Applications
There are a lot of Texas Instruments TLV2241IP Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Automation control systems
- Medical imaging
- Test and measurement instruments
- Laptop
- E-book readers
- Active probe
- Comparator
- Industrial control system
- earphone
