TLV2211CDBVRG4 Overview
There is a SOT-23 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape & Reel case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. 5 pins are located on the operational amplifiers. The input offset voltage is 450μV. The buffer amplifier is capable of operating from a supply current of 13μA . It is recommended to keep the voltage gain at 118.06dB at all times. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The operating supply voltage of the buffer op amp is rated at 5V. This linear amplifier pack is based on the TAPE AND REEL axis. Under 10V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5V.
TLV2211CDBVRG4 Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
TLV2211CDBVRG4 Applications
There are a lot of Texas Instruments
TLV2211CDBVRG4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
