TLV1391IDBVTG4 Overview
In the package, you will find a SOT-23-case to contain the op amp ic. The instrumentation amplifier in this picture is of the COMPARATOR-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Comparator device, to be precise. The op amp ic has an array of 5 pins on it. Op amp rates 5mV as input offset voltage. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces OPEN-COLLECTOR signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of this instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 7V as far as supply voltage is concerned. A voltage of 2V or higher is recommended for the linear amplifier's supply voltage. The current is quiescent at 175μA.
TLV1391IDBVTG4 Features
5 Pins
supply voltage of 3V
Output Type: OPEN-COLLECTOR
TLV1391IDBVTG4 Applications
There are a lot of Texas Instruments
TLV1391IDBVTG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
