TLE2144INE4 Overview
In the package, you will find a N-case to contain the op amp ic. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 14 pins on it. Op amp rates 600μV as input offset voltage. Using an 13.8mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 99.55dB at all times. On the buffer amps, there are 4 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 105°C should not be used for the operation of this instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 22V. The linear amplifier is packaged by using a TUBE axis. This electric component can work from a voltage of under 44V as far as supply voltage is concerned. A voltage of 4V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 22V volts when you conduct this part.
TLE2144INE4 Features
14 Pins
supply voltage of 15V
99.55dB voltage gain
TLE2144INE4 Applications
There are a lot of Texas Instruments
TLE2144INE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
