TLE2141IPE4 Overview
A PDIP case is used to package the op amp. OPERATIONAL AMPLIFIER-type instrumentation amplifiers are used in this application. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1.4mV. An 3.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. In order for op amp to function properly, the temperature should not be lower than -55°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 22V. The instrumentation amplifier is packed in the form of TUBE. I would like to point out that this electrical component is capable of working from a voltage below 44V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 4V at all times. The dual supply voltage of 22V should be used for the conduct of this electronic component.
TLE2141IPE4 Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2141IPE4 Applications
There are a lot of Texas Instruments
TLE2141IPE4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
