TLE2141CPE4 Overview
There is a PDIP case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 200μV. The buffer amplifier is capable of operating from a supply current of 3.5mA . It is recommended to keep the voltage gain at 106.85dB at all times. This op amp contains 1 circuits. For this linear amplifier to work, the temperature should not be below -55°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The operating supply voltage of the buffer op amp is rated at 22V. This linear amplifier pack is based on the TUBE axis. Under 44V is the minimum supply voltage for this electric component. Over 4V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 22V.
TLE2141CPE4 Features
8 Pins
supply voltage of 15V
106.85dB voltage gain
TLE2141CPE4 Applications
There are a lot of Texas Instruments
TLE2141CPE4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
