Name: TLE2082IDG4
Brand: Texas Instruments
SKU: TLE2082IDG4
Availability: InStock

new-10%

TLE2082IDG4

Manufacturer part number:TLE2082IDG4

Manufacturer:Texas Instruments

Description:20pA 98 dB Instrumentational OP Amps 0.000175μA 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:TLE2082IDG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	Excalibur™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TLE2082
Pin Count	8
JESD-30 Code	R-PDSO-G8
Qualification Status	Not Qualified
Power Supplies	+-5/+-15V
Number of Circuits	2
Current - Supply	3.1mA
Slew Rate	45V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	98 dB
Current - Input Bias	20pA
Voltage - Supply, Single/Dual (±)	4.5V~38V ±2.25V~19V
Gain Bandwidth Product	10MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	10000 kHz
Average Bias Current-Max (IIB)	0.000175μA
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	19V
Voltage - Input Offset	1.1mV
Current - Output / Channel	48mA
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000175μA
Programmable Power	NO
Neg Supply Voltage-Max (Vsup)	-19V
Wideband	NO
Power	NO
Input Offset Current-Max (IIO)	0.00095μA
Common-mode Reject Ratio-Min	80 dB
Height Seated (Max)	1.75mm
Length	4.9mm
RoHS Status	ROHS3 Compliant

TLE2082IDG4 Product Details

TLE2082IDG4 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. This is a J-FET type op amp. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amp consists of 2 circuits in total. To run supply current of buffer amplifier under 3.1mA. As the name implies, Excalibur? refers to the series of the buffer op amp.