TLE2081ACDRG4 Overview
In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 8 pins on it. Op amp rates 470μV as input offset voltage. Using an 1.7mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 106dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 19V. The linear amplifier is packaged by using a TAPE AND REEL axis. This electrical part should be conducted under the dual supply voltage of 19V volts when you conduct this part.
TLE2081ACDRG4 Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2081ACDRG4 Applications
There are a lot of Texas Instruments
TLE2081ACDRG4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
