TLE2074INE4 Overview
In the package, you will find a PDIP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 14 terminations. A total of 14 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 14 pins on it. Op amp rates 5mV as input offset voltage. Using an 6.5mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 106dB at all times. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of this instrumentation amplifier. 4 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 19V. This electrical part should be conducted under the dual supply voltage of 19V volts when you conduct this part.
TLE2074INE4 Features
14 Pins
supply voltage of 5V
106dB voltage gain
TLE2074INE4 Applications
There are a lot of Texas Instruments
TLE2074INE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
