TLE2072ACP Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3.5mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 3.1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106dB. There are a total of 2 channels available on the op amps. The operating supply voltage of the buffer op amp is rated at 19V. Buffer op amp series numbers are indicated by the Excalibur™.
TLE2072ACP Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2072ACP Applications
There are a lot of Texas Instruments
TLE2072ACP Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
