TLE2061MD Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 3.1mV voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . As long as the supply current of the chip does not exceed 290μA, this op amp ic can operate. There should be no change in the voltage gain at 93.06dB. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, TR is adopted as the packing method. Buffer op amp series numbers are indicated by the Excalibur?.
TLE2061MD Features
8 Pins
supply voltage of 5V
93.06dB voltage gain
TLE2061MD Applications
There are a lot of Texas Instruments TLE2061MD Instrumentational OP Amps applications.
- E-book readers
- Micro signal measurement
- Inverse/same-phase proportional circuit
- Band-stop filter
- pH (acidity)
- Professional videography
- PDA
- RF cable systems
- Video data acquisition
- Division circuits
