TLE2024INE4 Overview
It is packaged in an N-case that protects the operational amplifiers from damage. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 1mV for input offset voltage. A supply current of 1.05mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 123.52dB. There are a total of 4 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. The operating supply voltage of the buffer op amp is rated at 20V. An buffer amplifier is packed in a TUBE-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 40V, which is suitable. Keeping the linear amplifier's supply voltage above 4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 20V volts.
TLE2024INE4 Features
14 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2024INE4 Applications
There are a lot of Texas Instruments
TLE2024INE4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
