TLE2021CDRG4 Overview
In order to protect the op amps, a SOIC case is used. There are two types of operational amplifiers in this circuit. In the case of Tape and Reel cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 600μV. In order for this instrumentation amplifier to operate, the supply current needs to be between 240μA and 10 . Maintain 123.52dB as the voltage gain. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 85°C degrees. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 20V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 40V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 4V when using it. It is recommended that you conduct this electronic part using the dual supply voltage of 20V.
TLE2021CDRG4 Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
TLE2021CDRG4 Applications
There are a lot of Texas Instruments
TLE2021CDRG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
