TLC7135CN Overview
The package follows the same design pattern as Tube.There is a version 28-DIP (0.600, 15.24mm) of the package that includes it as part of it.The type of display used in this electrical device is LED, LCD.This electronic component is mounted on the board using the Through Hole axis.Display drivers is recommended that this electrical part be operated at a temperature of 0°C~70°C.As long as you use a 4V~6VV power source, it should work.Transmission lines are terminated with 28 terminations using devices whose characteristic impedance matches that of the transmission line.One of the members of the TLC7135 family of devices is this device.There are a total of 21 28 pins on the device.There is a voltage of 5V applied to the supply voltage of this device.The same can also be done with Analog to Digital Converters.In this case, 1mA is the maximal supply current.Due to its two +-5V power supplies, it can run anywhere in the world.ADC, DUAL-SLOPE converters are based on the voltage at the input and output of the source in order to convert the voltage.A 1 analog In channel is a channel in the electromagnetic spectrum that represents a bandwidth.This electronic part was designed using 4 Bits as a design tool.
TLC7135CN Features
28-DIP (0.600, 15.24mm) package
TLC7135 family
28 pin count
+-5V power supplies
ADC, DUAL-SLOPE converters
TLC7135CN Applications
There are a lot of Texas Instruments
TLC7135CN display drivers applications.
- Relay Driver
- Digital Clock, Thermometer, Counter, Voltmeter
- Instrumentation Readouts
- Instrumentation
- Test Equipment
- Hand Held Instruments
- Bargraph Dlsplays
- Numerlc and Non-Numerlc Panel Dlsplays
- High and Low Temperature Envlronment s where LCD
- Dlsplay Integrtty ls Compromissd
