TLC5947DAPG4 Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package is used for saving board space. LED drivers with this design have 24 outputs.It is possible to mount the led driver using Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.It is possible for the led driver ic to operate normally at -40°C~85°C TA.A number of benefits are available to Backlight.On the basis of the frequency 4MHz, it operates.It operates with 32 terminations.A configuration of this chip is made up of 32 pins.There are estimated to be 24 segments.The LED driver is available under the part number TLC5947.It's acceptable for the voltage to be 5.5V.This device has an output voltage of 30V volts.The device has 32 pins.In addition to Display Drivers, it is also classified by its characteristics.A minimal input voltage of 3V is required for it to operate.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.Whenever the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is less than 90mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 30mA current.This LED driver is also characterized by the number HTTP://WWW.TI.COM/LIT/ML/MPDS380/MPDS380.PDF.
TLC5947DAPG4 Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 4MHz
Supply voltage of 3.3V
HTTP://WWW.TI.COM/LIT/ML/MPDS380/MPDS380.PDF
TLC5947DAPG4 Applications
There are a lot of Texas Instruments TLC5947DAPG4 LED Driver ICs applications.
- Amusement Machines
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- Museum lighting
- Replacement lamps
- Down lights
- Medical surgery lighting
- Sports Facility Lighting
- Stage and Studio lighting
- Street lighting
