TLC59284DBQR Overview
24-SSOP (0.154, 3.90mm Width) saves board space. 16 outputs are designed into LED drivers.The mounting method is Surface Mount.When it emerges as a Linear, it performs extremely well and is highly reliable.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Signage has many benefits.A frequency of 35MHz is used to operate it.It operates with 24 terminations.Its configuration is based on 24 pins.Under 3V voltage supply, undetermined failures may occur.The segment count is 16.The mount is in the direction of Surface Mount.There is a base part number TLC59284 for this LED driver.5.5V is an acceptable maximum value for the supply voltage.A voltage of 10V is produced by it.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A minimum supply voltage of 3V is required to meet the highest efficiency standards.If the maximum supply current is less than 11mA, the device is capable of providing high efficiency.A load can be supplied with 45mA current.
TLC59284DBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC59284DBQR Applications
There are a lot of Texas Instruments TLC59284DBQR LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Linear fluorescent
- Street lighting
- Portable lighting
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Stage Lighting and Signage
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- Replacement lamps
