TLC541IFN Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-LCC (J-Lead) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 11 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 40k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to TLC541 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The ADC converter operates with the maximal supply voltage of 5.5V.11 inputs are employed.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 12.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 12.5mW.The number of channels is growing strong/weak: 12.The conversion rate of this electrical AD converter is calculated as 40 ksps.Selectable Address can be ensured when operating.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 4.75V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.
TLC541IFN Features
1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 4.75V
1 elements
Maximal supply voltage (DC) of 5.5V
TLC541IFN Applications
There are a lot of Texas Instruments TLC541IFN ADC applications.
- Transducer
- 3-phase power control
- Data Acquisition Systems
- TD-SCDMA, WiMAX
- Digital Storage Oscilloscope
- Audio/Video devices
- 4-channel data acquisition
- Spectrum Analysis
- RADAR processing, digital oscilloscopes
- Cell Phones
